Japanese

MADE IN JAPAN.MADE BY JAPANESE

The Pride of Japanese Craftsmen

Since 1953, KAMIYA SAW & KNIFE have offered circular saw blades,
knives and other high quality cutting tools for industrial use worldwide.
Our products are all made in Osaka, Japan, by proud Japanese Craftsmen.
We continue to provide the highest standard of cutting tools to support superior manufacturing.

OUR PRODUCTS

Steel & Non Ferrous

Saw Blades (for metals)

Saw Blades (for metals)

Hold the side swing to the limit, it will realize excellent finished surface roughness.

Diamond Saw Blades

Diamond Saw Blades

The cutting edge of PCD, and then realized and dramatic long life, the reduction of running cost.

Round Knife / Slitter Knife

Round Knife / Slitter Knife

It reduces chips, and that can be cut while suppressing the material loss "Eco-knife".

Round Knife / Slitter Knife

Round Knife / Slitter Knife

It reduces chips, and that can be cut while suppressing the material loss "Eco-knife".

Round Knife / Slitter Knife

Round Knife / Slitter Knife

It reduces chips, and that can be cut while suppressing the material loss "Eco-knife".

Round Knife / Slitter Knife

Round Knife / Slitter Knife

It reduces chips, and that can be cut while suppressing the material loss "Eco-knife".

Round Knife / Slitter Knife

Round Knife / Slitter Knife

It reduces chips, and that can be cut while suppressing the material loss "Eco-knife".

Round Knife / Slitter Knife

Round Knife / Slitter Knife

It reduces chips, and that can be cut while suppressing the material loss "Eco-knife".

  • Wood

    Wood

  • Cement & Plaster

    Cement & Plaster

  • Plastic

    Plastic

  • Paper & Film

    Paper & Film

  • Recycling

    Recycling

OUR HISTORY

OUR HISTORY

Founded more than 60 years ago,
we have been consistently developing our tools to stay up to date
with the cutting innovation in industrial fields.
Towards the world market,
towards the future we will always steadily trade with you.

  • Founded

    Founded

    KAMIYA SAW & KNIFE was established in 1953 by Yoshiharu Kamiya.
    We began our history in Osaka, Japan where we became well known as "Manufacturing Town". From then until the present day we have been devoted to making better circular saw blades. This is the foundation on which we have built our company.

  • Developed

    Developed "KAMIYA" brand in Japan and OEM offered all over the world.
    We have developed our manufacturing technology in parallel with the development of new material.
    We are the first maker of PCD circular saw blade / cutter in Japan.

    Developed

  • To 100 Years Company

    To 100 Years Company

    We highly value our relationships with others. We promise to walk alongside you. We promise to contribute to our society and the world. We will always hold true to our principles, which contribute to the development and consistent high standards of our manufacturing.

OUR QUALITY

OUR QUALITY

Witness what craftsmanship of
Made in Japan that produces high-quality

Is the first high level of quality conditions that we think of,
and it is a uniform to continue to provide quality products but
Incorporating always the equipment state-of-the-art, and even the craftsmanship
from the elderly craftsmen young generation of There is a need to go in the footsteps to craftsman.
This is what world-class, it is the quality of our Kamiya Kiko.

  • Certainly eye of Japan is

    Certainly eye of Japan is
    proud craftsman

    It saw blade material and state in the combined optimum grinding wheel of the select, subtle setting of a combination of the wheel of various hardness and grain size. To draw out the ability of the grinding machine to the fullest can not be in the machine, you will need a skilled eye.

  • Delicate proposal tailored to the needs

    Our cutlery consultant is an expert in industrial cutlery will advise the many years of experience cutting solutions and optimum blade in consideration of the entire system, such as knives and cutting machine.

    Delicate proposal tailored to the needs

  • Sophisticated that does not

    Sophisticated that does not cause a mistake

    Circular saw is not causing the blade vibration even during high-speed rotation of 500-10,000rpm, it must be able to straight cut. By exquisite hammer ring by skilled craftsmen, within thin 0.03mm disk side runout with outer diameter 360mm or less, to within 0.05mm in 830mm or less, it is possible to keep to a minimum level that can not be realized in machining.

Achieve a high level of processing accuracy
in all the way in the manufacturing

Guaranteed and advanced processing technology by skilled technicians,
the high quality by the precision inspection by state-of-the-art equipment.

  • The material of the body

    The material of the body

    General wood or plywood, boards such as cosmetic perch, it can respond to the phenol substrate, sizing cutting of any material, such as soft noncombustible.

  • Tensioning-distortion repair

    Tensioning-distortion repair

    General wood or plywood, boards such as cosmetic perch, it can respond to the phenol substrate, sizing cutting of any material, such as soft noncombustible.

  • Chip of material

    Chip of material

    General wood or plywood, boards such as cosmetic perch, it can respond to the phenol substrate, sizing cutting of any material, such as soft noncombustible.

  • Carbide brazing

    Carbide brazing

    General wood or plywood, boards such as cosmetic perch, it can respond to the phenol substrate, sizing cutting of any material, such as soft noncombustible.

  • Polishing of body

    Polishing of body

    General wood or plywood, boards such as cosmetic perch, it can respond to the phenol substrate, sizing cutting of any material, such as soft noncombustible.

  • Polishing of the cutting edge

    Polishing of the cutting edge

    General wood or plywood, boards such as cosmetic perch, it can respond to the phenol substrate, sizing cutting of any material, such as soft noncombustible.

Quality Management

  • Aiming to further customer satisfaction

    Aiming to further customer satisfaction
    up Get quality management "ISO9001"

    Get the ISO9001, the international standard for quality management. For customer satisfaction, with the aim of product, the continuous improvement of processes and systems, all employees are working every day.

  • Osaka Prefecture, Chamber of Commerce and Industry are organized.

    Osaka Prefecture, Chamber of Commerce and Industry are organized.
    Was awarded the "Osaka Manufacturing Excellence Company Award"

    Kamiya Kiko has been awarded the "advanced technology" and "high quality, low cost and quick delivery" boast and to honor excellent Manufacturing SMEs of Funai "Osaka Manufacturing Excellence Company Award 2013".

FAQ

  • Although cutlery I want you to ride to the consultation, do you what should I I tell?

    The type and dimensions of the cutting material, please inform the data such as the type and number of revolutions, the feed of the cutting machine. In accordance with the processing conditions, and then choose the cutlery of optimal specification in our company.

  • Is it possible to produce up to how much of the size?

    And types of cutlery, the product to be processed, since it depends on the machinery of use, please do not hesitate to contact us.

  • Estimates are free?

    Okay. Since I estimate, of course free of charge, please feel free to contact us.

  • Only Could you estimate the drawing?

    Okay. Once we receive send drawings by fax, check the contents, we will answer the delivery date and amount. Also, even if you send us by e-mail attachments it is fine. Please feel free to tell us.

  • If you send the test material, could it cutting test was free?

    Okay. When it was capable of in our company, we will support you to the cutting test for free.

  • Are there any such correspondence area.

    No. Sorry, we have not found particularly. The world can be supported, also we have been corresponding to inquiries from either. (Depending on the consultation content, some areas may become excluded)

  • I want you to look at the place where it is processed in-house factory directly, but could you come.

    Okay. Our cutlery consultant will ask you (in some areas it may be excluded).

  • I want to change the material of the blade you are currently using, do you have any good ones?

    The possible is a proposal knowing the material and problems of the tool of the current use.

  • What is the delivery date of the re-polishing.

    Depending on the type of cutlery you might get for your time, but I am generally not delivered in 1-2 weeks. Please contact us if you hurry.

ABOUT

about

Company profile

Head Office / Factory 4-10-23 Hiranonishi Hirano-ku Osaka, 547-0033 Japan
TEL +81 6 6702 3022 / FAX +81 6 6702 3017
E-mail: overseas@kamiya-saw.co.jp
Foundation February, 1953
President Akifumi Kamiya
Paid-In Capital 45 Million Yen (As of 2015/12/31)
Field of Business Manufacturing and sales of industrial " machine saw blades,
knives, tools and machinery parts
Employees 35 (As of 2015/12/31)
A member group The Osaka Chamber of Commerce and Industry
Japan Industrial Saw and Knife Association
Main Bank Bank of Tokyo-Mitsubishi UFJ

Overseas cooperation

Indonesia PT. KAMIYA SAW AND KNIFE INDONESIA Delta Silicon Service Center E-mail: overseas@kamiya-saw.co.jp

Kamiya Kikou Co.,Ltd

CONTACT US

*Required item

Name*
Company*
SiteURL
Postal code*
Address*
E-mail*
Tel*
Message

Cutlery specifications
currently in use, such as
cutting work information,
please write if you could
tell us.